
Chevrolet Performance
Chevrolet Performance 19434602 602 Sealed Circle Track Engine
SKU: 6da4a3a8a685
$5,105.56
In stockFully GM assembled long block | Steel Valve Cover with Chevy Bowtie Logo Breathers | 12366573 High Rise Aluminum Intake Manifold | HEI Distributor | 8” Harmonic Balancer
Buy now
Shipping estimator
Enter a ZIP code for delivery guidance.
Need help confirming fitment?
Our specialists verify compatibility before you order.
GM is pleased to offer a new addition to the crate motor line-up, with its version of a Factory Stock Circle Track Crate Motor. You will be pleased with the quality & durability that this Factory Sealed motor offers, complete with its four-bolt main block, nodular iron crankshaft, PM connecting rods, cast aluminum pistons, hydraulic flat tappet cam and of course the famous Vortec cast iron cylinder heads. GM finishes it off with a high-rise dual plane intake, a HEI distributor, Circle Track valve covers with breathers and an 8-quart circle track oil pan assembly. The 350HP was derived from a Superflow Dyno using a 4-barrel 650cfm Holley carburetor. Fully GM assembled long block Steel Valve Cover with Chevy Bowtie Logo Breathers 12366573 High Rise Aluminum Intake Manifold HEI Distributor 8” Harmonic Balancer Oil pump, pick-up and 8 quart oil pan Front timing cover
Highlights
Fully GM assembled long block
Steel Valve Cover with Chevy Bowtie Logo Breathers
12366573 High Rise Aluminum Intake Manifold
HEI Distributor
8” Harmonic Balancer
Specifications
Crate Engine Type: Long Block
Engine Displacement: 5.7 liters
Horsepower: 350 horsepower
Compression Ratio: 9.1:1
Torque: 390 ft./lbs.
Camshaft Type: Hydraulic Flat Tappet
Cylinder Head Material: Cast Iron
Piston Material: Hypereutectic Aluminum
Crankshaft Material: Forged Steel
Combustion Chamber Volume: 64cc
Camshaft Duration (.050 in): 212° intake / 222° exhaust
Camshaft Lift (in): .435 intake / .460 exhaust
Bore x Stroke (in): 4.040" x 3.480"
Carburetor Included: No
Intake Manifold Included: Yes
Distributor Included: No
Connecting Rod Material: Powdered Metal
Valve Covers Included: Yes
Engine Balance: External
Cylinder Heads Included: Yes
Rear Main Seal Style: 1-piece
Throttle Body Included: No
Oil Pan Included: Yes
Timing Cover Included: Yes
Water Pump Included: No
Harmonic Balancer Included: Yes
Flexplate Included: No
Flywheel Included: No
Air Cleaner Included: No
Spark Plugs Included: No
Spark Plug Wires Included: No
Computer Included: No
Wiring Harness Included: No
MFG. Part #: 19434602
Sold in Quantity: Each
Recommended Fuel: 91-93 Octane
Brand: Chevrolet Performance Parts
Emissions Notice
Emissions warning: this part is for vehicle engine changes, not direct oem engine replacements. In California, engine changes are legal when done in compliance with California bureau of automotive repairs (bar) engine change policy. For assistance, call bar referee at: (800) 622-7733. And see https://bar.Ca.Gov/consumer/smog_check_program/engine_changes. All customers must comply with federal epa mobile source enforcement memorandum no. 1a (and addendum) and all applicable state regulations when conducting engine changes. Improper installation and/or use of this part in California may subject the installer and/or owner to a $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and laws of all states for use of this engine change part on makes or models of vehicles that render them noncompliant with applicable state and/or federal emission laws with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine
Nationwide shipping
Secure checkout
Expert fitment support

